Shantou Airtech Plastic Machinery Co., Ltd.

1、 Cleaning and lubrication

Regular cleaning: Conduct a comprehensive cleaning and inspection of the machine every two weeks to ensure that the surface of the machine is dust-free and free of debris. Carefully clean the equipment, especially the friction surfaces and sliding parts, to prevent dust and debris from affecting the operation of the machine.

Lubrication and maintenance: Before use, check the main components of the machine and add lubricating oil. After completing the work, wipe the exposed friction surface and replenish lubricating oil to ensure smooth operation of the machine.

2、 Tool maintenance

Tool quality: Use high-quality longitudinal and transverse cutters to ensure cutting effectiveness and machine lifespan.

Tool adjustment: Adjust the accurate tool spacing according to the job requirements, paying attention to the direction of the cutting edge. Regularly check the wear of cutting tools and replace severely worn tools in a timely manner.

3、 Electrical maintenance

Regular inspection: Regularly clean and inspect the electrical components to ensure good circuit connections and no short circuits or open circuits.

Safety protection: Ensure good grounding of electrical equipment to prevent static electricity accumulation from causing damage to the equipment.

4、 Maintenance of rotating parts

Regular inspection: Conduct regular and irregular checks on rotating parts to ensure smooth operation and no abnormal sounds.

Vulnerable parts monitoring: Real time monitoring of the status of vulnerable parts, such as bearings, belts, etc., and timely replacement of severely worn components.

5、 Long term disuse treatment

Rust prevention treatment: If the machine is not used for a long time, all bright surfaces should be wiped clean and coated with rust prevention oil. If the product has been out of use for more than 3 months, moisture-proof paper should be placed on top of the rust proof oil to prevent rusting.

Dust protection: Cover the entire machine with a plastic cover to prevent dust from entering the interior.

6、 Operating standards

Professional training: Operators must undergo professional training and be familiar with the usage methods and maintenance points of the machine.

Safe operation: Before operation, labor protection measures should be taken, such as wearing protective goggles, gloves, etc. Strictly follow the operating procedures to avoid equipment damage or personnel injury caused by illegal operations.

Shutdown maintenance: After shutdown, the power and gas sources should be turned off, and the machine should be cleaned and maintained as necessary. Try not to scrape the excessive roller with a knife, and wipe the glue on the equipment clean with solvent.

In summary, the daily maintenance of the film slitting machine involves multiple aspects such as cleaning and lubrication, tool maintenance, electrical maintenance, rotating part maintenance, long-term shutdown treatment, and operating standards. Only by carrying out these maintenance tasks can the stable operation and extended service life of the film slitting machine be ensured.